求ch32v307使用freertos系統移植TcpClient的例程，將網絡單獨作為任務編譯時出現以下錯誤

16:21:33 **** 構建 of configuration obj for project FreeRTOS-V307 ****

make -j20 all?

c:/mounriver/mounriver_studio/toolchain/risc-v embedded gcc/bin/../lib/gcc/riscv-none-embed/8.2.0/../../../../riscv-none-embed/bin/ld.exe: ./User/Tcp.o: in function `WCHNET_CreateTcpSocket':

D:\開發\3-CH32V307\FreeRTOS-V307\obj/../User/Tcp.c:78: undefined reference to `WCHNET_SocketCreat'

c:/mounriver/mounriver_studio/toolchain/risc-v embedded gcc/bin/../lib/gcc/riscv-none-embed/8.2.0/../../../../riscv-none-embed/bin/ld.exe: D:\開發\3-CH32V307\FreeRTOS-V307\obj/../User/Tcp.c:81: undefined reference to `WCHNET_SocketConnect'

c:/mounriver/mounriver_studio/toolchain/risc-v embedded gcc/bin/../lib/gcc/riscv-none-embed/8.2.0/../../../../riscv-none-embed/bin/ld.exe: D:\開發\3-CH32V307\FreeRTOS-V307\obj/../User/Tcp.c:84: undefined reference to `WCHNET_GetVer'

c:/mounriver/mounriver_studio/toolchain/risc-v embedded gcc/bin/../lib/gcc/riscv-none-embed/8.2.0/../../../../riscv-none-embed/bin/ld.exe: ./NetLib/eth_driver.o: in function `ETH_LibInit':

D:\開發\3-CH32V307\FreeRTOS-V307\obj/../NetLib/eth_driver.c:631: undefined reference to `WCHNET_ConfigLIB'

c:/mounriver/mounriver_studio/toolchain/risc-v embedded gcc/bin/../lib/gcc/riscv-none-embed/8.2.0/../../../../riscv-none-embed/bin/ld.exe: D:\開發\3-CH32V307\FreeRTOS-V307\obj/../NetLib/eth_driver.c:635: undefined reference to `WCHNET_Init'

collect2.exe: error: ld returned 1 exit status

make: *** [makefile:60: FreeRTOS-V307.elf] Error 1

您好，可以對照檢查一下工程中有沒有添加網絡庫的路徑，如下圖

謝謝，已解決，是沒有添加網絡庫。