CH32V307RCT6 今天（2022年7月7日）下午升級了仿真器固件之后，有過幾次成功仿真，隨后在下載程序時提示
------------ Begin flash process of "obj\app.bin" ------------?
23:30:43:561 >> Current project vendor is WCH, debugger is WCH-Link
23:30:43:561 >> Attempt to open device and upgrade firmware if necessary...
23:30:43:562 >> WCH-Link no need to upgrade. Already the latest version.
23:30:43:601 >> Starting to Send Chip Type...
23:30:43:642 >> Read-Protect is currently enabled. Or not support this packaged chip type.
Read-Protect is currently enabled. Or not support this packaged chip type.
23:30:43:643 >> Starting to Close Link...
23:30:43:643 >> Close Link Success
-----------------------------End -----------------------------
點擊進入debug，提示如下，進不了任何斷點
Open On-Chip Debugger 0.11.0+dev-02215-gcc0ecfb6d-dirty (2022-05-17-19:01)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
Ready for Remote Connections
Started by GNU MCU Eclipse
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : WCH-Link-CH549? mod:RV version 2.5?
Error: Read-Protect Status Currently Enabled
芯片進入官方下載模式，可以識別并能成功下載程序，說明硬件沒有問題。
重啟電腦N次，現(xiàn)象依舊。
技術人員能否核實一下？正在項目開發(fā)緊急關頭，希望早點解決問題。
