開始是正常的，打開了定時器中斷，可以正常運行；之后再下載就提示這個錯誤

------------ Begin flash process of "obj\CH32V103C8T6.hex" ------------?

16:16:31:527 >> Current project vendor is WCH, debugger is WCH-Link

16:16:31:528 >> Starting to Open Link in RISC-V APP mode...

16:16:31:528 >> Open Link in RISC-V APP mode Success

16:16:31:528 >> Starting to get link mode...

16:16:31:530 >> Link is under APP mode

16:16:31:530 >> Starting to compare firmware version...

16:16:31:530 >> No need to update. Already the latest version. Version is v2.3.

16:16:31:530 >> Starting to Send Chip Type...

16:16:31:570 >> Board chip status error

Board chip status error

16:16:31:570 >> Starting to Close Link...

16:16:31:570 >> Close Link Success

---------------------------------End ----------------------------------

過了一會 板子也不運行了，重新上電也沒反應了

您好,您下載的是FLASH的例程嗎?FLASH的例程在操作flash沒有結束時,下載會報這個錯誤,您可以重新上電通過串口查看一下打印,在打印128Byte Page Verity Sucess結束之后點擊下載可以正常下載.您也可以把工程發我郵箱,我這邊幫您看一下(fq@wch.cn).