能來個官方大大的FAE傳授一下CH573是怎么做的仿真調試，板子是前段時間申請到的官方Demo板子。

CH573為RISC-V內核的MCU，仿真需要使用WCH-Link：http://www.findthetime.net/products/WCH-Link.html?

仿真步驟：

1、通過ISP工具開發CH573仿真調試功能

2、通過MounRiver Studio 軟件進行仿真調試

SWDIO接PB14 、 SWCLK接PB15，點擊Debug即可

------------ Begin flash process of "obj\ch573f_base.hex" ------------?

20:57:55:854 >> Current project mcu vendor is WCH...

20:57:55:854 >> Starting to Open Device in RISC-V...

20:57:55:856 >> Open Device in RISC-V Success

20:57:55:856 >> Starting to get device status...

20:57:55:857 >> Device module is APP

20:57:55:857 >> Starting to compare firmware version...

20:57:55:870 >> No need to update. Firmware v1.5 already the latest version.

20:57:55:870 >> Starting to Send Chip Type...

20:57:55:872 >> Send Chip Type Success

20:57:55:872 >> Starting to Get Firmware Version...

20:57:55:874 >> Get Firmware Version Success. Version= V1.5

20:57:55:874 >> Starting to Erase All...

20:57:57:015 >> WCH-Link failed to connect with chip

WCH-Link failed to connect with chip

20:57:57:015 >> Starting to Close Device...

20:57:57:016 >> Close Device Success

我的也連不上啊............