下面是File_sys.c中定義的函數，我C語言比較差，請高手能解釋的更詳細點嗎? 謝謝！ UINT8 CH376ByteWrite( PUINT8 buf, UINT16 ReqCount, PUINT16 RealCount ) /* 以字節為單位向當前位置寫入數據塊 */ { UINT8 s; xWriteCH376Cmd( CMD2H_BYTE_WRITE ); xWriteCH376Data( (UINT8)ReqCount ); xWriteCH376Data( (UINT8)(ReqCount>>8) ); xEndCH376Cmd( ); if ( RealCount ) *RealCount = 0; while ( 1 ) { s = Wait376Interrupt( ); if ( s == USB_INT_DISK_WRITE ) { s = CH376WriteReqBlock( buf ); /* 向內部指定緩沖區寫入請求的數據塊,返回長度 */ xWriteCH376Cmd( CMD0H_BYTE_WR_GO ); xEndCH376Cmd( ); buf += s; if ( RealCount ) *RealCount += s; } /* else if ( s == USB_INT_SUCCESS ) return( s );*/ /* 結束 */ else return( s ); /* 錯誤 */ } }[Emot]8[/Emot]

對照我們的說明書看 字節寫的命令(CMD_BYTE_WRITE),應該可以看懂

這個函數的運行大致的流程:首先發送字節讀命令CMD2H_BYTE_WRITE,緊接著發送需要讀取的長度,隨后開始根據長度來讀取數據，該函數的返回是實際讀取的數據長度.看看CH376DS1.PDF，這些在文檔中都有說明.