官方EVT只有TIM+ADC和ADC+DMA，我試了幾種合并，但是最終還是沒實現，DMA傳輸完成中斷進不去

有什么需要注意的點嗎

以下為全部代碼

#include "debug.h"

/* Global Variable */

s16 Calibrattion_Val = 0;

u16 ADC_ConvertedValue[10];

void DMA_Tx_Init( DMA_Channel_TypeDef* DMA_CHx, u32 ppadr, u32 memadr, u16 bufsize)

{

? ? DMA_InitTypeDef DMA_InitStructure={0};

? ? ? ? NVIC_InitTypeDef NVIC_InitStructure = {0};

? ? RCC_AHBPeriphClockCmd( RCC_AHBPeriph_DMA1, ENABLE );

? ? DMA_DeInit(DMA_CHx);

? ? DMA_InitStructure.DMA_PeripheralBaseAddr = ppadr;

? ? DMA_InitStructure.DMA_MemoryBaseAddr = memadr;

? ? DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;

? ? DMA_InitStructure.DMA_BufferSize = bufsize;

? ? DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;

? ? DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Disable;

? ? DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;

? ? DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;

? ? DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;

? ? DMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh;

? ? DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;

? ? DMA_Init( DMA_CHx, &DMA_InitStructure );

? ? DMA_ITConfig(DMA1_Channel1,DMA_IT_TC, ENABLE);? ? ? //使能傳輸完成中斷

? ? NVIC_InitStructure.NVIC_IRQChannel = DMA1_Channel1_IRQn;

? ? NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2;

? ? NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;

? ? NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;

? ? NVIC_Init(&NVIC_InitStructure);

}

/*********************************************************************

?* @fn? ? ? ADC_Function_Init

?*

?* @brief? ?Initializes ADC collection.

?*

?* @return? none

?*/

void ADC_Function_Init(void)

{

? ? ADC_InitTypeDef? ADC_InitStructure = {0};

? ? GPIO_InitTypeDef GPIO_InitStructure = {0};

? ? RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);

? ? RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE);

? ? RCC_ADCCLKConfig(RCC_PCLK2_Div8);

? ? GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1;

? ? GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;

? ? GPIO_Init(GPIOA, &GPIO_InitStructure);

? ? ADC_DeInit(ADC1);

? ? ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;

? ? ADC_InitStructure.ADC_ScanConvMode = DISABLE;

? ? ADC_InitStructure.ADC_ContinuousConvMode = DISABLE;

? ? ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_T2_CC3;

? ? ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;

? ? ADC_InitStructure.ADC_NbrOfChannel = 1;

? ? ADC_Init(ADC1, &ADC_InitStructure);

? ? ADC_ExternalTrigInjectedConvCmd(ADC1, ENABLE);

? ?ADC_RegularChannelConfig(ADC1, ADC_Channel_1, 1, ADC_SampleTime_41Cycles5);

?//? ADC_InjectedSequencerLengthConfig(ADC1, 1);

?//? ADC_InjectedChannelConfig(ADC1, ADC_Channel_1, 1, ADC_SampleTime_41Cycles5);

//? ? NVIC_InitStructure.NVIC_IRQChannel = ADC1_2_IRQn;

//? ? NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2;

//? ? NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;

//? ? NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;

//? ? NVIC_Init(&NVIC_InitStructure);

//? ? ADC_ITConfig(ADC1, ADC_IT_JEOC, ENABLE);

? ? DMA_Tx_Init(DMA1_Channel1, (u32)&ADC1->RDATAR, (u32)ADC_ConvertedValue, 1);

? ? ? DMA_Cmd(DMA1_Channel1, ENABLE);

? ? ADC_DMACmd(ADC1, ENABLE);

? ? ADC_Cmd(ADC1, ENABLE);

? ? ADC_BufferCmd(ADC1, DISABLE); //disable buffer

? ? ADC_ResetCalibration(ADC1);

? ? while(ADC_GetResetCalibrationStatus(ADC1));

? ? ADC_StartCalibration(ADC1);

? ? while(ADC_GetCalibrationStatus(ADC1));

? ? Calibrattion_Val = Get_CalibrationValue(ADC1);

}

/*********************************************************************

?* @fn? ? ? TIM1_PWM_In

?*

?* @brief? ?Initializes PWM.

?*

?* @return? none

?*/

void TIM1_PWM_In(u16 arr, u16 psc, u16 ccp)

{

? ? GPIO_InitTypeDef? ? ? ? GPIO_InitStructure = {0};

? ? TIM_OCInitTypeDef? ? ? ?TIM_OCInitStructure = {0};

? ? TIM_TimeBaseInitTypeDef TIM_TimeBaseInitStructure = {0};

? ? RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA| RCC_APB2Periph_TIM1, ENABLE);

? ? RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2,ENABLE);

? ? GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;

? ? GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;

? ? GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;

? ? GPIO_Init(GPIOA, &GPIO_InitStructure);

? ? TIM_TimeBaseInitStructure.TIM_Period = arr;

? ? TIM_TimeBaseInitStructure.TIM_Prescaler = psc;

? ? TIM_TimeBaseInitStructure.TIM_ClockDivision = TIM_CKD_DIV1;

? ? TIM_TimeBaseInitStructure.TIM_CounterMode = TIM_CounterMode_Up;

? ? TIM_TimeBaseInit(TIM2, &TIM_TimeBaseInitStructure);

? ? TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;

? ? TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;

? ? TIM_OCInitStructure.TIM_Pulse = ccp;

? ? TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_Low;

? ? TIM_OC3Init(TIM2, &TIM_OCInitStructure);

? ? TIM_CtrlPWMOutputs(TIM2, ENABLE);

? ? TIM_OC3PreloadConfig(TIM2, TIM_OCPreload_Disable);

? ? TIM_ARRPreloadConfig(TIM2, ENABLE);

? ? TIM_SelectOutputTrigger(TIM2, TIM_TRGOSource_Update);

? ? TIM_Cmd(TIM2, ENABLE);

}

/*********************************************************************

?* @fn? ? ? Get_ConversionVal1

?*

?* @brief? ?Get Conversion Value.

?*

?* @param? ?val - Sampling value

?*

?* @return? val+Calibrattion_Val - Conversion Value.

?*/

u16 Get_ConversionVal(s16 val)

{

? ? if((val + Calibrattion_Val) < 0||val==0)

? ? ? ? return 0;

? ? if((Calibrattion_Val + val) > 4095 || val==4095)

? ? ? ? return 4095;

? ? return (val + Calibrattion_Val);

}

/*********************************************************************

?* @fn? ? ? main

?*

?* @brief? ?Main program.

?*

?* @return? none

?*/

int main(void)

{

? ? SystemCoreClockUpdate();

? ? USART_Printf_Init(115200);

? ? printf("SystemClk:%d\r\n", SystemCoreClock);

? ? ADC_Function_Init();

? ?// ADC_RegularChannelConfig(ADC1, ADC_Channel_1, 1, ADC_SampleTime_239Cycles5 );

? ? printf("CalibrattionValue:%d\n", Calibrattion_Val);

? ? TIM1_PWM_In(1000-1,96-1,500);

? ? while(1);

}

//void ADC1_2_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));

/*********************************************************************

?* @fn? ? ? ADC1_2_IRQHandler

?*

?* @brief? ?ADC1_2 Interrupt Service Function.

?*

?* @return? none

?*/

//void ADC1_2_IRQHandler()

//{

//? ? u16 ADC_val;

//

//? ? if(ADC_GetITStatus(ADC1, ADC_IT_JEOC))

//? ? {

//? ? ? ? printf("ADC Extline trigger conversion...\r\n");

//? ? ? ? ADC_val = ADC_GetInjectedConversionValue(ADC1, ADC_InjectedChannel_1);

//

//? ? ? ? printf("JADC %04d\r\n", Get_ConversionVal(ADC_val));

//? ? }

//

//? ? ADC_ClearITPendingBit(ADC1, ADC_IT_JEOC);

//}

void? DMA1_Channel1_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));

void? DMA1_Channel1_IRQHandler(void)

{

? ? if(DMA_GetITStatus(DMA1_IT_TC1)!=RESET){

? ? ? ? //中斷處理代碼

? ? ? ? printf("The current value =%d \r\n",ADC_ConvertedValue[0]);

? ? ? ? DMA_ClearITPendingBit(DMA1_IT_TC1);

? ? }

}

https://www.cnblogs.com/wchmcu/p/17445959.html? 看下這個帖子 ，配置少了一點ADC_ExternalTrigConvCmd(ADC1, ENABLE);//? ?開啟外部事件觸發ADC啟動，ADC的外部觸發源與定時器的輸出源保持一致，也需要參考ADC外部觸發的框圖，注意觸發頻率不要大于ADC所有規則通道采樣完的這個時間。DMA的模式可以設為循環模式，這樣就不需要重新設置緩沖區與傳輸長度了。

已解決，謝謝?。。?/p>