Linux系統CPU+兩塊ch943x擴展出8個串口，現在串口不能收發數據，linux系統/proc/interrupts中斷有變化，日志見附件

log_tx_debug.zip

1. 在linux側向外(PC接的串口調試工具)發送數據時，驅動打印

[ 1045.394843] ch943x_spi spi0.0: ch943x_ist interrupt enter...

[ 1045.400586] ch943x_spi spi0.0: ch943x_port_read - reg:0x 5, val:0x60

[ 1045.407023] ch943x_spi spi0.0: ch943x_port_read - reg:0x 2, val:0xc1

[ 1045.413373] ch943x_spi spi0.0: ch943x_port_irq no int, quit

[ 1045.419026] ch943x_spi spi0.0: ch943x_port_read - reg:0x15, val:0x60

[ 1045.425464] ch943x_spi spi0.0: ch943x_port_read - reg:0x12, val:0xc1

[ 1045.431812] ch943x_spi spi0.0: ch943x_port_irq no int, quit

[ 1045.437467] ch943x_spi spi0.0: ch943x_port_read - reg:0x25, val:0x60

[ 1045.443902] ch943x_spi spi0.0: ch943x_port_read - reg:0x22, val:0xc1

[ 1045.450252] ch943x_spi spi0.0: ch943x_port_irq no int, quit

[ 1045.455907] ch943x_spi spi0.0: ch943x_port_read - reg:0x35, val:0x60

[ 1045.462345] ch943x_spi spi0.0: ch943x_port_read - reg:0x32, val:0xc1

[ 1045.468692] ch943x_spi spi0.0: ch943x_port_irq no int, quit

[ 1045.474261] ch943x_spi spi0.0: ch943x_ist end

您好，默認驅動程序不支持同時外掛2個CH9434設備，您把在用的修改后的驅動程序回傳到我司技術郵箱：tech@wch.cn 。我們看下是代碼端問題還是其他問題。

ch9434.zip

已發送到tech@wch.cn郵箱

1、日志和驅動程序已收到；看設備樹寫法是用的2個SPI接口，驅動流程可不用過多改動；

2、日志未發現寄存器狀態異常；

3、可檢查是否為串口應用軟件兼容問題，參考GitHub - WCHSoftGroup/tty_uart: linux tty uart application

驅動報這個錯不要急嗎？看驅動代碼，走到這個錯誤，就退出了，所以收發函數也處理不了

[ 1045.450252] ch943x_spi spi0.0: ch943x_port_irq no int, quit

linux 側沒用其它串口軟件，用的echo命令，?echo 1>/dev/ttyWCH00 執行后會有上述報錯