遠距模式好像只有這個配置能被發現 但advertData中的內容丟失了

uint8_t initial_adv_event_type = GAP_ADTYPE_EXT_NONCONN_NONSCAN_UNDIRECT;

GAP_SetParamValue(TGAP_ADV_PRIMARY_PHY, GAP_PHY_VAL_LE_CODED);
GAP_SetParamValue(TGAP_ADV_SECONDARY_PHY, GAP_PHY_VAL_LE_CODED);

不清楚以下幾種廣播方式的區別 有沒有辦法將advertData中的內容也發出去

#define GAP_ADTYPE_EXT_CONN_DIRECT????????????
#define GAP_ADTYPE_EXT_SCAN_UNDIRECT?????????
#define GAP_ADTYPE_EXT_NONCONN_NONSCAN_UNDIRECT
#define GAP_ADTYPE_EXT_CONN_UNDIRECT???????????
#define GAP_ADTYPE_EXT_SCAN_DIRECT????????????
#define GAP_ADTYPE_EXT_NONCONN_NONSCAN_DIRECT

您好，可以參考主機例程，在ObserverEventCB回調中添加?case GAP_EXT_ADV_DEVICE_INFO_EVENT: 事件。

有效果

???? case GAP_EXT_ADV_DEVICE_INFO_EVENT:
??????? {
??????????? int i;
??????????????????????? for(i=0; ideviceInfo.dataLen; i++)
??????????????????????? {
??????????????????????????? PRINT("%02x ",pEvent->deviceInfo.pEvtData[i]);
??????????????????????? }
??????????????????????? PRINT("\n");

?? }

但數據和廣播對不上? 得到的結果分別為observer 得到的數據分別為6f 10 d0 ? 00 00 00 ??

static uint8_t advertData[] = {

??? 0x02,
??????? GAP_ADTYPE_FLAGS,
??????? GAP_ADTYPE_FLAGS_BREDR_NOT_SUPPORTED,

??????? 0x02,
??????? 0x01,0x18

};

static uint8_t advertData2[] = {

??? 0x02,
??????? GAP_ADTYPE_FLAGS,
??????? GAP_ADTYPE_FLAGS_LIMITED,

??????? 0x02,
??????? 0x01,0x17

};

static void advTask(void)
{
? if (open) {
??? GAP_UpdateAdvertisingData(Broadcaster_TaskID,TRUE,sizeof(advertData2), advertData2);
??? open = FALSE;
? }else {
??? GAP_UpdateAdvertisingData(Broadcaster_TaskID,TRUE,sizeof(advertData), advertData);
??? open = TRUE;
? }

}

謝謝 用pEvent->deviceExtAdvInfo.pEvtData 就ok